31
E-flite Taylorcraft ARF Assembly Manual
9. Position the cowling so the hole for the propeller is
centered with the propeller adapter, and so the propeller
will not rub against the cowling. Use low-tack tape to
hold the cowl in position for the following step.
10. Use a pin drill and 1/16-inch (1.5mm) drill bit
to drill four locations (two each side) for the cowl
mounting screws.
Note
: Ensure the painted stripe on the cowl lines up with
the stripe on the fuselage
11. Use a 3-32-inch (2mm) drill bit to enlarge the holes
in the cowling ONLY.
12. Apply 2–3 drops of thin CA to each of the holes in
the fuselage to harden the surrounding wood.
