27
E-flite Taylorcraft ARF Assembly Manual
5. Repeat Steps 3 and 4 to install the remaining wheel.
6. Rest your model on a flat surface. Slide the wheel
pant over the wheel and position it so there is ground
clearance for the wheel pant.
7. Use a felt-tipped pen to mark the location for the
wheel pant screw.
8. Drill the location marked in the previous step using a
pin drill and 1/16-inch (1.5mm) drill bit.
9. Position the wheel pant back on the gear and secure it
using a 2mm x 6mm sheet metal screw.
5. Repeat Steps 6 through 9 to install the remaining
wheel pant.