26
E-flite Taylorcraft ARF Assembly Manual
2. Attach the landing gear to the fuselage using two 4-40
x 3/8-inch socket head screws and two #4 washers. Use
threadlock on the screws to prevent them from vibrating
loose in flight.
3. Slide a 4-40 x 1
1
/
4
-inch-inch socket head screw
through the wheel. Place a washer on the screw and
thread a 4-40 locknut onto the screw. A 4-40 nut is then
tightened against the locknut. Check that the wheel can
spin freely on the screw.
4. Pass the screw into the lower hole in the landing gear.
Secure the wheel using a 4-40 locknut.
