![E-FLITE Stearman PT-17 15e ARF Assembly Manual Download Page 7](http://html1.mh-extra.com/html/e-flite/stearman-pt-17-15e-arf/stearman-pt-17-15e-arf_assembly-manual_3193416007.webp)
Ο 11. Align the elevator with the stabilizer and apply
2 - 3 drops of thin CA to each hinge. Do not use
accelerator on the hinges as the CA needs to
penetrate the hinge for a complete bond.
Ο 12. Using the marks made in steps 1, 2 and 4, check
that the stabilizer is aligned with the fuselage.
Apply several drops of thin CA to each side of the
joint to glue the stabilizer in place.
Ο 13. Locate the tailwheel assembly. Using the supplied
Allen wrench, separate the tailwheel shaft from the
wheel assembly.
Ο 14. Install the tailwheel shaft in the fuselage.
Ο 15. Install two hinges in the rudder. Mix a small
amount of 6-minute epoxy and apply it to the tail
wheel shaft hole in the rudder with a toothpick,
then slide the rudder assembly on to the fin.
Use rubbing alcohol to clean any excess epoxy.
Use a T-pin in the center of each hinge to ensure
that it remains centered during installation.
E-flite Stearman PT-17 15e ARF Assembly Manual
7
7