ΟΟ 4. Hold the servo in place on the underside of the
hatch with the arm centered in the opening and
aligned with the edge of the hatch.
ΟΟ 5. Use a pencil to mark the location of the servo
mounting tabs.
ΟΟ 6. Use medium CA or 6-minute epoxy to glue the
servo mounting blocks to the aileron hatch.
ΟΟ 7. Place the servo on the hatch and use a pencil to
mark the servo mounting holes.
ΟΟ 8. Use a 1/16-inch drill bit in a pin vise to make
the servo mounting holes.
ΟΟ 9. Apply 2-3 drops of thin CA to each hole to
strengthen the wood.
E-flite Stearman PT-17 15e ARF Assembly Manual
1
133
