E-FLITE Pitts Model 12 15e ARF, Assembly Manual

Page: 3 / 36

3 E-flite Pitts Model 12 15e ARF Assembly Manual
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next
to each step to keep track of each step completed. Steps with
a single circle (

) are performed once, while steps with two
circles (
 
) indicate that the step will require repeating, such
as for a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.
Contents of Kit/Parts Layout
Large Replacement Parts
EFL2551 Wing Set w/ailerons
EFL2552 Fuselage w/rudder
EFL2553 Tail set
EFL2554 Cowling
EFL2555 Landing gear
EFL2556 Wheel pants
EFL2557 Pushrod set
EFL2558 Canopy
Required Radio Equipment
You will need a minimum 6-channel transmitter (for proper
mixing and dual rate capabilities), crystals, micro receiver, and
four micro servos. You can choose to purchase a complete radio
system that includes all of these items or, if you are using an
existing transmitter, just purchase the other required equipment
separately. We recommend the crystal-free, interference-free
Spektrum ™ DX7 2.4GHz DSM ® 7-channel system. If using your
own transmitter, we recommend the JR SPORT ™ MC35 Micro
servos.
If you own the Spektrum DX7 radio, just add the AR7000 DSM2
™
7-channel receiver and four of our JR SPORT MC35 Micro servos.
Complete Radio System
SPM2710 DX7 DSM 7CH system
Or Purchase Separately
JRPR720UL UltraLite 7-Channel ScanSelect
FM Receiver (72MHz)
Or
SPMAR6200 AR6200 DSM2 6-Channel Receiver Ultralite
(for DX7 only)
Or
SPM6070 AR7000 DSM2 7CH Rx (for DX7 only)
And
JSP20030 MC35 Micro Servo (4)
EFLREX6L 6-inch lightweight extension (2)
EFLREX9L 9-inch lightweight extension (2)