14
E-flite Pitts Model 12 15e ARF Assembly Manual
Stabilizer Installation
Required Parts
Fuselage w/wings
Stabilizer/elevator
Required Tools and Adhesives
Thin CA
Hobby knife
Ruler
Felt-tipped pen
1. Use a hobby knife to remove the covering for the
horizontal stabilizer from the fuselage.
2. Slide the stabilizer in the slot. Center the stabilizer as
shown in the image below.
3. Make sure the stabilizer is parallel to the wings as
shown. Lightly sand the slot in the fuselage as necessary
to correct for any misalignment.
