7. Plug in the aileron (and flap) servo leads. Slide
the wing dowels into the holes at the front. Use
the two 4-40 x 3/4" socket head screws and two
#4 washers to secure the wing.
8 Check your alignment of the wing to the
horizontal stabilizer at this time. You should
have some play in the stab holes. Measure the
stab tip to the wing tip. Adjust the stab until the
measurements are equal. Now you can tighten
the 3mm locknuts at the stabilizer.
21
Summary of Contents for Mini Ultra Stick PNP
Page 1: ...Mini Ultra Stick PNP Assembly Manual...
Page 25: ...25...