4. Install the micro control connector onto the
elevator servo arm. Pass the elevator pushrod
wire through the connector. With the radio
on and elevator trim centered, center the elevator.
Secure the elevator pushrod wire
using the 2mm x 4mm screw and a small
Phillips screwdriver.
5. Repeat Steps 1 through 4 for the rudder
servo and linkage using the 5
3
/
4
" (145mm)
pushrod wire.
38
Summary of Contents for Mini FuntanaX
Page 1: ...Mini FuntanaX Assembly Manual...
Page 49: ...Building and Flying Notes 49...
