Rudder and Fin
Required Parts
Fuselage
Rudder
Fin
CA hinge (3)
Required Tools and Adhesives
Hobby knife
Thin CA
Felt-tipped pen
Square
6-minute epoxy
Medium grit sandpaper
1. Roughen the tail wheel assembly using medium
grit sandpaper. Use 6-minute epoxy to glue the
tail wheel assembly into the rudder.
2. Hinge the rudder and fin, using the same process
as described in Aileron Hinging. Use 3 hinges for
this process.
2. Place the fin in position on the fuselage. Trace the
outline of the fuselage onto both sides of the fin.
34
Summary of Contents for Mini FuntanaX
Page 1: ...Mini FuntanaX Assembly Manual...
Page 49: ...Building and Flying Notes 49...