10. Place the servo into position between the
mounting blocks. Mark the location for the servo
mounting screws using a felt-tipped pen.
Note
:.The.servo.should.not.rest.against.the.
hatch.to.isolate.it.from.vibrations.
11. Use a 1/16" (1.5mm) drill bit to drill the
holes in the servo mounting blocks for the screws.
Secure the servo using the screws provided with
the servo.
Note
:.Make.sure.the.servo.is.centered.before.it.
is.completely.mounted.and.trim.the.servo.arm.
as.shown.
23
