Wing Assembly
Required Parts
• Clevis (2)
• Clevis retainer (2)
• Pushrod wire keeper (2) • CA hinge (6)
• Mini Servo (2)
• 6" servo extension(2)
• Cub yellow covering strip
• Wing panel (left and right)
• Aileron (left and right)
• Plywood wing joiner (2)
• Aileron servo cover (left and right)
• 3/4" x 3/8" x 3/8"
(19mm x 10mm x 10mm) servo block (4)
• Control horn w/backplate (2)
• 2mm x 20mm screw (4)
• 2mm x 10mm sheet metal screw (8)
• 4" (100mm) linkage wire (2)
• Long Servo Arm (JRPA212) (2)
Required Tools and Adhesives
• 6-minute epoxy
• Phillips screwdriver
• Thin CA
• T-pins
• Drill
• Felt-tipped pen
• 30-minute epoxy
• Drill bit: 1/16" (1.5mm), 5/64" (2mm)
• String
• Masking tape
1. Place a T-pin in the center of three hinges.
18
