7
E-flite Extra 300 32e ARF Assembly Manual
5. Secure a 6-inch (152mm) servo extension to the
aileron servo lead using string or a commercially
available connector. This will keep the servo and
lead from disconnecting inside the wing.
6. Insert the extension into the opening for the
aileron servo. Guide the extension through the
wing and out of the wing root as shown.
7. Position the servo in the servo opening. Make
sure it is centered and not touching the sides of the
opening. Use a pencil to mark the locations for the
servo mounting screws.
8. Move the servo and use a pin vise with a 1/16-
inch (1.5mm) drill bit to drill the holes for the
aileron servo mounting screws. Use care not to
accidentally drill through the covering on the top of
the wing.
9. Apply 2–3 drops of thin CA in each of the holes
to harden the surrounding wood. This will make the
screws more secure when they are installed.
10 Use the screws provided with the servo to
secure it in the wing. Note that the output of
the servo faces to the aileron. Use a #1 Phillips
screwdriver to tighten the screws.
