28
E-flite Extra 300 32e ARF Assembly Manual
Wing Installation
Required Parts
Fuselage assembly Wing panel (right and left)
Carbon wing tube #4 washer (2)
4-40 x 1-inch socket head screw (2)
Required Tools and Adhesives
Ball driver: 3/32-inch
1. Slide the carbon wing tube in one of the wing
panels. It will only fit in so far, so only slide it in as
far as it will easily slide.
2. Slide the tube into the fuselage. Make sure to
guide the servo lead from the aileron servo into the
fuselage as well.
3. Slide the wing tightly against the fuselage. The
rear anti-rotation pin will fit into the fuselage to
keep the wing from rotating.
4. Use a 4-40 x 1-inch socket head screw and #4
washer to secure the wing to the fuselage. Use a
ball driver to tighten the screw. Use of a ball driver
is highly suggested as the screw can not be easily
accessed directly with a standard hex wrench.
5. Repeat Steps 2 through 4 to attach the
remaining wing panel to the fuselage.
6. Plug the aileron servos into the correct ports of
the receiver.
