25
E-flite Extra 300 32e ARF Assembly Manual
Rudder Pull-Pull Cable Installation
Required Parts
Fuselage assembly Rudder cable (2)
Cable fitting (4)
Cable crimp (4)
Nylon clevis (4)
Clevis retainer (4)
Radio system
Heavy-duty servo horn
Required Tools and Adhesives
Low-tack tape
Crimping tool or pliers
Side cutters
Hobby knife with #11 blade
Phillips screwdriver: #1
1. Using low-tack tape to keep the rudder centered
when installing the rudder cables will make the
installation much easier.
2. Slide a crimp on one end of a rudder cable.
3. The cable then goes through the hole in the
cable fitting as shown.
4. Pass the cable back through the crimp, then loop
the cable through the crimp again.
5. Use a crimping tool or pliers to secure the crimp
to the cable.
6. Use a hobby knife with a #11 blade to
remove the covering from the fuselage for the
cable to pass through.
7. Insert the end of the rudder cable with the
fitting into the fuselage through the hole in the
side of the fuselage.
