37
E-flite Piper Pawnee ARF Assembly Manual
Motor Installation
Required Parts
Fuselage
Motor w/mount and accessories
#4 washer (4)
Cowling
Motor
Battery
Electronic speed control
Propeller
Plywood X mount spacer (2)
Hook and Loop straps (2)
2mm x 8mm sheet metal screw (4)
4-40 x 3/4-inch socket head screw (4)
Required Tools and Adhesives
Drill bit: 1/16-inch (1.5mm), 1/8-inch (3mm)
Threadlock
Phillips screwdriver: #2
Card stock
Low-tack tape
Pin drill
Ball driver: 3/32-inch
1. Attach the X-Mount to the motor using the screws
provided with the motor and a #2 Phillips screwdriver.
Make sure to use threadlock on all four screws so they do
not vibrate loose.
2. Attach the motor to the firewall using four
4-40 x 3/4-inch socket head screws and a 3/32-inch
ball driver. Place the (2) 3mm plywood X mount spacers
between the firewall and motor mount. Make sure to
use threadlock on the four screws to prevent them from
vibrating loose.
3. Plug the motor wires into the speed control. Secure the
speed control to the bottom of the motor box using hook
and loop tape.
