E-flite Diamante 5e ARF Assembly Manual
2. Use a rotary tool and a 1/16 in (1.5mm) drill bit to
drill a hole in the center of each hinge slot of both the
aileron and wing. This provides a tunnel for the CA to
wick into, penetrating the hinge.
Hint
: You can prepare the rudder, fin, elevator and
stabilizer at this time as well.
3. Slide the four hinges into the slots in the aileron.
4. Slide the aileron into position on the wing. The
T-pins installed back in Step 1 will help in keeping
equal amounts in the wing and aileron.