The sketch map of the steel wire using for the wings.
In order to fix the upper wings,assemble one side of the
aluminum plates to the center wing with screws as illustration.
Epoxy the wing skids to slots in the lower wing .
2
Wing skids
2
Wing skids
Washer(3x6mm)
4
4
Screw (3x10mm)
4
Aluminum plate
Screw (3x10mm)
Nut 3mm
Washer (3x6mm)
Steel wire
Aluminum tube
Fix the wing struts to the appropriate position between the
upper wings and lower wings.
Assemble the steel wires to the other side of the Aluminum
plates with screws.
Screw (3x10mm)
Washer (3x6mm)
Steel wire
Aluminum tube
Screw (3x16mm)
Nut 3mm
Washer (3x6mm)
Fix the wing struts of the centre wing to the centre
wing & fuselage as illustration.
21
16
20
19
6
18
17
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x250mm)
Set Screw (2mm)
Linkage Stopper
1
1
1
1
Rod (2x250mm)
Set Screw (3x4mm)
Assemble the throttle linkage.
The sketch map when the engine install completion.
Assemble the engine to the fuselage via the engine
mount tubes and screws.
Install the exhaust to the engine.
Epoxy the cover plate to the fuselage as illustration.
Screw (5x20mm)
Washer(5x10mm)
4
Washer(5x10mm)
4
Screw (5x20mm)
According to the engine position,epoxy the servo mount
to appropriate place.
1
Servo mount
68
15
65
69
66
67
70