E-FLITE Blade CP Pro 2, Manual, Page: 28 / 40

54 55
Flybar Paddle Tracking Adjustment
While main blade tracking is a critical element of flight performance, proper flybar paddle tracking and positioning
is also important in maintaining proper control response and vibration-free operation .
To check flybar paddle tracking, positioning and making adjustments, please note the following tips:
• Confirm that both flybar paddles are equally spaced from the ends of the paddle control frame. If they are not
equally spaced, adjust the position of the flybar by loosening the setscrews located in the paddle control frame,
then sliding the flybar from side to side until they are .
• Be certain that both flybar paddles are parallel to the paddle control frame. If they are not, loosen the screws
and nuts in the flybar paddles and twist the paddles until they are properly aligned and parallel with the paddle
control frame .
• If you have made certain that both flybar paddles are parallel to the paddle control frame arms, they should now
be parallel to one another . If they are not, take your time making adjustments in order to ensure that both flybar
paddles are positioned parallel to one another and the paddle control frame .
• Once you have properly positioned and aligned the flybar paddles following these tips, be certain they are firmly
secured using the screws, washers and hex nuts .
Flybar Weights, Head Dampening Shims and Fine-Tuning Cyclic Response
Your Blade CP Pro 2 is equipped with flybar weights that are secured in their outermost position against the
flybar paddle .
In this position, the weights help to provide added stability by increasing the amount of cyclic input required to
overcome the gyroscopic force of the flybar paddles . In general, flying with the weights in this position will still
provide good cyclic response, but with reduced sensitivity (especially when in hover), when compared to having
them positioned closer to the head/main shaft on the flybar . We suggest that you make your first flights with the
flybar weights in this position before making any adjustments .
If, after the first few flights, you feel as though the cyclic response is too quick, we recommend the addition of
one or more weights on each side of the flybar, next to the weights that were already installed . Additional weights
are available separately in packs of two (EFLH1165) . With the added weights installed, the cyclic response will
become noticeably less responsive .