E-FLITE Blade CP Pro 2, Manual, Page: 19 / 40

36 37
Moving the stick to the right will roll the helicopter to the right, allowing the helicopter to be flown to the right .
The aileron trim can be used to help keep the helicopter from drifting left or right when in hover with no aileron
stick input . For example, if the helicopter drifts to the right when in hover, add left aileron trim until the helicopter
hovers as level as possible with no drifting to the right .
Once you’re familiar with the primary controls of the helicopter, you are almost ready to fly .
Dual Rates
The HP6DSM transmitter included with your Blade CP Pro 2 features a Dual Rate (D RATE) switch . This switch
allows the pilot the toggle between the high (HI) and low (LO) control rates available for the aileron, elevator and
rudder channels .
When the switch is toggled toward the back of the transmitter (position HI), the control rates will be allowed to
achieve their highest maximum values . This is typically the preferred rate for experienced pilots interested most in
maximum control for performing basic and 3D aerobatic maneuvers .
When the switch is toggled toward the front of the transmitter (position LO), the control rates will only be allowed
Dual Rate Switch
Helicopter Moves Right
Mode 2
Mode 1