11
E-flite AT-6 Texan ARF Assembly Manual
9. Slide a clevis retainer onto a nylon clevis. Thread the
clevis onto the 21
3
/
4
-inch (553mm) pushrod wire. Slide
the pushrod wire into the opening in the fuselage that
aligns with the stabilizer control horn. Snap the clevis
onto the elevator control horn.
10. Slide the tail wheel onto the tail gear wire. Use a
1/16-inch wheel collar., setscrew and the included hex
wrench to secure the wheel. Remember to use threadlock
on the setscrew to prevent it from vibrating loose.