E.F. Johnson 5300 SERIES Operating Manual Download Page 12

Page: 12 / 67

CONTROLS AND DISPLAY

Channel Number -

Indicates the currently selected

channel (conventional) or talk group (other modes).

Status Display -

These two characters indicate the

following status information:

This symbol in the left position indicates that

the displayed channel is in the scan list
(scanned normally).

A “P” in the left position indicates that the

selected conventional channel is a priority
channel (first priority with dual priority).

A “2” in the left position indicates that the

selected conventional channel is a second
priority channel.

This rotating clock-like symbol in the right

position indicates that scanning is enabled.

When this triangle is displayed, the scan list edit

or keypad programming mode is indicated (see
Section 4.12 or Section 5.16).

Indicates a SMARTNET/SmartZone telephone

call has been initiated. It is non-functional in the
conventional mode.

Indicates that voice encryption is enabled or that

an encrypted call is being received. Refer to Section
11.3.4 for more information.

MON

Indicates that the conventional monitor mode

is enabled by taking the microphone off-hook or
pressing the

MON

option switch. This disables

squelch control features so that all messages on the
channel are heard. Refer to Sections 5.2 and 5.3 for
more information.

The lines above the zone and channel displays

indicate which display is changed if the Select switch
is turned. To switch between displays, press the Select
switch (see Section 3.4.2).

Summary of Contents for 5300 SERIES




































































Search results

Summary of Contents for 5300 SERIES

Reviews:

Related manuals for 5300 SERIES

Brands by name

Popular brands

E.F. Johnson 5300 SERIES, Operating Manual

Search results

Summary of Contents for 5300 SERIES

Reviews:

Related manuals for 5300 SERIES

Brands by name

Popular brands