34
Configurations software
4.
ICON LIST
"Load File" (see Configuration Software, chapter 3.1 File)
"Save File" (see Configuration Software, chapter 3.1 File)
"New Transmitter" (see Configuration Software, chapter 3.4 Transmitter)
"Read Transmitter" (see Configuration Software, chapter 3.4 Transmitter)
"Save Transmitter" (see Configuration Software, chapter 3.4 Transmitter)
"Read All Transmitters" (see Configuration Software, chapter 3.4 Transmitter)
"Write All Transmitters" (see Configuration Software, chapter 3.4 Transmitter)
"Delete Transmitter" (see Configuration Software, chapter 3.4 Transmitter)
5.
INDEX - INDEX CARDS
5.1
Analogue
For easy configuration of both analogue outputs.
Range:
Using the drop-down input field, select either a standardized output signal (0-5V,
0-10V, 0-20mA, 4-20mA) or a user-defined current/voltage output range (upper
and lower limits may be selected as required between the limits indicated).
Physical Quantity:
Selects the output physical quantities.
Upper / Lower Limit:
Sets the desired scaleing of the output. The limits must fall within the operating
range indicated above.
Units:
Selects between SI or US units.
Summary of Contents for EE31
Page 29: ...29 Hardware...