28
Preferences:
Displays the preferences for all transmitters that have been set-up.
The preferences may also be changed here.
Delete transmitter:
Deletes from the tree structure the selected transmitters, or the selected groups.
Read:
Reads and displays the configuration parameters of the selected transmitter.
Read All:
Reads the configuration for all transmitters.
Note:
Only those parameters that have the same value for all transmitters of the network
will be displayed. Other values are shaded and can not be selected or changed.
Write:
Writes the current configuration into the selected transmitter.
Write All:
Writes the current configuration to all selected transmitters.
Set the configuration for a transmitter, then select the appropriate network in the
tree and write the configuration all transmitters of the target group using the
command "Write All."
Warm Start:
Resets and restarts the microprocessor of the selected transmitter.
3.5
? - Information
Version:
Displays the version number of the EE29/31 software currently installed and the
contact information for E+E Elektronik.
i
i
Configuration software
