25
CONFIGURATION SOFTWARE
LIMITED LIABILITY
E+E Elektronik
®
is not liable for any damages or consequential damages (for example, but
not restricted to loss of earnings, interruption of business, loss of information and data or
any other pecuniary damages), that result from the installation, usage and also
impossibility of usage of a software product from E+E Elektronik
®
and supportservices
possibly associated with it or non-performance of support.
1.
GENERAL INFORMATION
The configuration software was developed by E+E Elektronik Ges.m.b.H to allow fast and easy
configuration of individual transmitters (EE29 / EE31) as well as of transmitter networks
(only EE31).
This software tool is included in delivery.
System requirements: MS WINDOWS 98® or higher; RS232 serial interface
2.
INSTALLATION
Insert the CD-ROM supplied with the transmitter into your PC and open the set-up
application. Follow the instructions of the dialogue menus to set the desired language
and all further parameter for installation. At the end of the routine, the software is installed
and the Readme file or the program will be automatically opened.
Note:
If the configuration software has already been installed, or for upgrade only, the older
version must first be uninstalled (the User will be notified during the installation routine
and the process will be interrupted automatically).
To remove the previous version, open the software folder in the system control panel. All
of the programs installed on your system are located here. Uninstall the EE29/31
Configurator by clicking on the appropriate button and then install the upgrade.
i
Configuration software
