See3CAM_30_Z10X
Application User Manual
25-February-2014
|
Subject to change without notice
Page 5 of 14
5 Pre-Requisites
This section describes the high level instructions to install the See3CAM_30_Z10X on a PC.
Please refer the Getting Started manual for more detailed installation steps and pictures of the
same.
5.1 Installation of the See3CAM_30_Z10X and Drivers
Follow the following steps to initialize the device with the host computer
Connect the one end of the USB 3.0 cable to the USB 3.0 connector provided at the back
of See3CAM_30_Z10X, and connect the other two ends to the USB 3.0 host controller on
the computer.
Once connected the LED light on the device will glow indicating that See3CAM_30_Z10X
is powered up and ready to use.
As See3CAM_30_Z10X is a generic USB Video Class device windows will automatically
detect all the drivers and it will be installed. This happens for the first time and from the
second time device will be detected immediately by the host PC and will be ready for use.
To see the preview the e-CAMView application designed for See3CAM_30_Z10X has to
be installed. The installation steps are given in the
section 5. Installation of e-CAMView
of the
e-CAMView Installation Manual for See3CAM_30_Z10X
document.
