Stimulation Button “S(Black)”
- Sends momentary or continuous stimulation to the collar receiver
based on the state of Momentary/Continuous Button.
- Pressing stimulation button in continuous mode will send stimulation
to the collar receiver for the duration of the button being pressed. After
10 seconds the Over-Stimulation feature will stop the stimulation until
the button is released and pressed again.
Stimulation Booster Button “S(Red)”
- Send momentary or continuous boosted stimulation.
- The default value of the boosted level is 20, it can be adjusted to any
value between 1 and 60. Smaller and more sensitive breeds should
use levels 1 through 20, larger more stubborn breeds can use 20
through 60.
- If current level is higher than “100-boosting level”, output intensity
level will be 100 (HI).
- Useful function in emergency situation.
Einstein Owner's Manual ET-300TS
BUTTON FUNCTIONS
14
- Boosting Stimulation in Combo Mode
Momentary boosting is accomplished by first sending a momentary
stimulation pulse “S(Black)” to the dog and keeping the button pressed
and then applying the Continuous “S (Red)” Button
Continuous boosting is accomplished by first pressing the Continuous
“S (Red)” Button keeping the button pressed and then applying the
Momentary “S (Black)”. The over-stimulation feature will only allow 10
seconds of continuous stimulation.
Summary of Contents for Einstein ET-300TS
Page 1: ...ET 300TS Owner s Manual ...
Page 30: ......
