13
9. troubleshooting
failure
cause
solution
Failure to change speed or too slow maximum
speed.
1. Battery discharged or low.
2. Command failure.
3. Engine control failure.
1. Charge the battery fully.
2. Replace the remote.
The motor is on but it does not work.
1. Fault in the control.
2. Bad contact of the battery or contacts.
3. Engine control failure.
1. Replace the remote.
2. Reconnect and check the connections.
3. Replace the control.
Inadequate mileage for a load.
1. Low tire pressure.
2. Inadequate load.
3. The battery is damaged or its life
extinguished.
4. Circular accelerating or braking or frequent
slopes.
1. Inflate the wheels according to the instruc-
tions.
2. Replace the charger.
3. Replace the battery.
The charger does not charge.
1. The cable is damaged or does not work.
2. The mains plug is damaged or does not work.
1. Replace the cable.
2. Check the line and repair.
*Authorized personal only.
* Any electrical repairs must be done by a specialized technician. The repair by the user or unauthorized personnel may result in loss of the warranty
and serious damage.
10. transportation, parking and storage of the bicycle.
DO NOT park the bicycle in places of passage.
Use the kickstand to support the bike and avoid chafing.
The bicycle must only be transported in a vehicle complying with traffic regulations and avoiding damage by blows, wind.
To transport you can remove the wheels whenever you are careful and knowledge of reassembling correctly.
If you need to remove saddle and handlebar, first mark the position where you use them to reassemble them.
Store sheltered from moisture and sun covering with a cloth. Do not leave leaning on places where you can suffer bumps or deformations.
