background image

Manual for Power Pack compatible for Yamaha* PW Series drive system

 

* Yamaha is a trademark of the YAMAHA CORPORATION 

 

         

   

Page 

2

 of 

12

 

Read manual carefully before use! 

This manual is integral part of the product. It contains important information and 
safety notes. Keep it in range and give it away with the product to third party. 

 

Introduction 

We are glad, that you choose a Lithium battery of our Power Pack range. 
Please take some time to read this manual carefully. It contains detailled information about 
handling of your battery, it’s functions and it’s care, as well as the usage of the E-Bike Vision 
fast charger. 
For further questions, do not hesitate to contact your dealer or get in contact with us via our 
homepage. 
Enjoy your new Power Pack and thank you for your confidence. 

Your E-Bike Vision Team

 

 

Disclaimer 

The E-Bike Vision GmbH assumes no responsibility for any loss, damages or costs arising 
from incorrect use and operation of the product, or related. 
The obligation to pay any compensation, regardless of the legal reason, is limited to the 
directly involved E-Bike Vision products invoiced value, as far as this is permitted by law. 
This does not apply, if a liability according to binding legal rules due to intent or gross 
negligencem has to be respected. Furthermore, the E-Bike Vision GmbH assumes no 
responsibility for the completeness and accuracy of the documents that come with the 
battery, due to its‘ different distribution channels. 

 

Guarantee 

For our battery products, we accept the legally applicable guarantee beyond a 24 months 
warranty. To qualify for the 24 months guarantee, submission of the purchase receipt is 
required. 
Please contact your dealer from whom you purchased the product, in guarantee cases. 
Excluded from the guarantee are malfunctions caused by: 
- improper operations, e.g. overheating, incorrect connection, short-circuit or reverse polarity, 
immersion in water, cleaning with high pressure or steam cleaners, deep discharge, wrong 
polarity or drop 
- use of non-approved accessories by the E-Bike Vision GmbH 
- accidental or deliberate damages 
- defectives due to normal tear 
- operation outside the technical specifications 
- damages that will not appear directly on the device, for which we assume the guarantee 
- grease the contacts with contact spray or similar 
- changes / repairs / modifications / installations or upgrades that have not be performed by 
the E-Bike Vision service center 

à

 use only our service center for repairs 

- optical damages that justify no functional damages or which can be remedied by cleaning 
- the costs for rental batteries 

Removal of the performace label leads to loss of warranty claim. 

Summary of Contents for POWERPACK 624 Wh













Reviews: