Date October 2021
Akku Vision - Manual PowerPack compatible to Bosch* Active / Performance
S.
8
/
9
Version 01
*Bosch is a trademark of the Robert Bosch GmbH
Break up of charging process
To complete the charging, switch off the charger and unplug the charging plug of the battery or out of the charge
plug of the frame. Pull the power plug of the charger from the wall socket.
Charging with your original charger is completed (State of Charge 100%), as soon as all LEDs are turned off.
Charging time
PowerPack
Capacity
6 A fast charger
4 A charger
2 A car charger
Compatible to Bosch* Active /
Performance 36 V
17.1 Ah
~ 3.3 h
~ 4.75 h
~ 9 h
20.7 Ah
~ 3.9 h
~ 5.6 h
~ 10.8 h
Battery usage
Please consider the safety instruction given earlier during usage of your E-Bike Vision PowerPack.
Your PowerPack will enter automatically into sleep-mode (if it is not installed in the eBike) after 3 seconds to
prevent itself of self-discharging.
Also, it will shut down the drive system after 10 minutes of no use of the eBike. It is irrelevant whether the lights
are enabled or not!
Take care, that the battery is in its correct position, before inserting. If not, you can damage the battery’s housing.
Before each use of PowerPack, it must be activated by pushing the capacity indicator button or by pushing the
ON / OFF switch of the HMI.
Do not press the capacity indicator button several times in quick succession, this activates and deactivates the
battery once again.
You installed your new E-Bike Vision PowerPack correctly in your eBike and locked it (do not forget to remove the
key)? Then turn on the drive system by the capacity indication button or via the ON /OFF switch of your HMI. The
drive system now read the current capacity of the battery and will calculate the approximated range, based on your
previous driving profile. The drive system is ready for use as soon as the speed is displayed.
Capacity is indicated during use as folows:
LED 1 flashing:
0 – 3 % charged capacity
LED 1 lighting:
4 – 20 % charged capacity
LED 1 and 2 lighting:
21 – 40 % charged capacity
LED 1,2 and 3 lighting:
41 – 60 % charged capacity
LED 1,2,3 and 4 lighting:
61 – 80 % charged capacity
LED 1,2,3,4 and 5 lighting:
81 – 100 % charged capacity
Do not remove your battery off the eBike, as long as the drive system is on. Turn it off before!
Light support
Your new PowerPack owns the latest and most safely battery management system technology and protects itself
from incorrect operation. Before the cells would be completely discharged, the battery switches off the motor.
However, there will remain enough power within the battery, to drive safe home with activated lights, if you are
powering the lights via the drive battery. Also electric switches will still work.
