background image

 

 

Date October 2021 

Akku Vision - Manual PowerPack compatible to Bosch* Active / Performance 

S. 

9

 / 

9

 

Version 01 

*Bosch is a trademark of the Robert Bosch GmbH 

 

 

Maintenance 

The life span of your PowerPack depends mainly of your carefully usage. 
Never use the complete capacity, but use it regular and store it at 17° C. That way, your battery will thank you will 
longer life span. 
With increasing aging your battery will loose capacity, anyway. 
Do not try to refresh or exchange the cells on your own! 
Get in contact with our service department. They can also rate and exchange single components after the warranty 
time. 
An essential shorte usage time after fully charged the battery indicates that the battery is dissipated, however. 
Replace it! 
 

Troubleshooting 

If your drive system can not be activated, please check the contacts of the discharge plug to make sure that they are 
clean, straight and undamaged and that there is a safe contact between battery and connector box. 

 

If the drive system can still not be activated, please try to charge your battery. 
If charging does not start, please check the polarity of the charge plug. 
Please test the battery by pushing the capacity indicator button. 
Is the power cord of the charger connected properly and performs the wallet socket? 
 
If the battery is damaged, defective or exits any liquids or smell? Please do not use your PowerPack further and 
contact your dealer or our service center. 
 

Recycling 

Do not dispose lithium batteries in the household waste! Return defective or used batteries to the 
battery dealers or to the municipal waste collection centers. Turn back the battery in discharged 
state. Also prevent short-circuits by covering the terminals. With the proper disposal of your battery, 
you make an important contribution to protect our environment

.

 

 

 

 
 

Summary of Contents for 10040










Reviews: