E.A.T. C-Sharp, Instructions For Use Manual

Page: 8 / 21

8
Once you have screwed the record clamp onto the platter, double-check to make sure that the
clamp is holding the platter securely. Then grasp the record clamp and use it to carefully lower
and center the platter on the sub-platter.
DO NOT PUT GREASE OR LUBICRANT BETWEEN SUB-PLATTER AND MAIN PLATTER
4. Tonearm assembly
The tonearm includes a combination of cardan and uni pivot bearings, immersed in special
damping fluid.
See the next steps to set up your tonearm.
!