E.A.T. C-Sharp, Instructions For Use Manual

Page: 17 / 21

17
sub-chassis, and then level the turntable by screwing or unscrewing the feet as needed. It is
advisable to check level from several positions on the subchassis.
6. Using the clamp, starting the motor, changing the speed
Using the clamp – after placing a record on the platter, place the record clamp on the spindle
and record. Do not screw down the clamp for playback – this function of the clamp is used only
when removing or replacing the platter.
Controling the turntable using the external “Speed Control” panel:
•
To start rotation of the platter, press either the button labeled 33 or 45 , depending on the
speed of the record to be played, 33 rpm or 45 rpm.
•
When you want to stop the turntable, or when it is not in use, switch it to STANDBY mode
by pressing the button labeled Stby .