28
If your robot becomes stuck, please move the robot off
the obstruction and place nearby to resume cleaning.
Check the brush bar for wrapped hair or debris
and remove.
Check that the brush bar is correctly fitted.
Check the tracks and remove any wrapped hair
and debris.
For further information please refer to the 'Brush bar
and track maintenance' section
Troubleshooting
1
2
If your robot encounters a
problem, it will display one of the
lighting patterns below. Follow the
instructions to fix the issue.
When the problem has been fixed,
return the robot to the same point on
the floor, press the power button again
and step away to resume cleaning.
Check that a seal has not formed between
the brush bar and the cleaning surface.
Check that the clear bin is fitted correctly.
If the clear bin is full, empty it.
Check that the cyclone shroud isn’t covered
or blocked.
Remove the cyclone pack and check the
airways behind it for blockages.
Remove the brush bar and check the
airways for blockages.
Check for blockages on both filters.
Wash both filters.
Check the filters are in place.
Airways
Brush bar/tracks
Post-motor filter
Pre-filter
Airways
Brush bar
Brush bar
Tracks
Summary of Contents for 360 Eye
Page 1: ...How to use your robot Comment utiliser votre robot...
Page 2: ...2...
Page 9: ...9...
Page 64: ...JN 51268 PN 201306 03 02 21 04 16 www dysoncanada ca...