J7886 D180 v1.1
Page 16 of 20
5.3.5 BUGS
You can set a marker or BUG to appear
on any or all of the three tapes.
Choose the type of bug to configure:
HDG/TRK (heading/track), IAS (Indicated
airspeed).
Heading / Track
TOGGLE
: Turns the heading or track
bug on and off on the heading tape.
SYNC
: Synchronises the bug to the
current heading or track.
SEL
►: Selects which digit to change.
DEC-
: Decreases selected digit.
INC+
: Increases selected digit.
AP74 VALUE
: When in the heading or
track menus, rotation of the VALUE knob
will rapidly alter the setting.
Airspeed
NOTE
:
A bug may be set for the airspeed but
can not be controlled through the
autopilot.
Altitude
TOGGLE
: Turns the altitude bug on and
off on the altitude tape.
SYNC
: Synchronises the bug to the
current altitude.
SEL
►: Selects which digit to change.
DEC-
: Decreases selected digit.
INC+
: Increases selected digit.
AP74 VALUE
:The altitude bug can be
adjusted at any time using the VALUE
knob.
5.3.6 Out of Trim Indicator
When the Autopilot is flying the aircraft in
Altitude Mode, an out-of-trim indicator
can appear to the right of the AP Status
Indicator. This alerts you when there is
excessive load on the pitch servo. The
indicator instructs you in the direction to
trim the nose to reduce elevator load.
