SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
Page | 4-5
Altitude Bug
The Altimeter can be adjusted with the left knob on the display or the ALT knob on the optional
Knob Control Panel (see Section
). Using the knob on the control panel simplifies the
adjustment by eliminating the need to assign the function to the left knob.
To change the Altitude bug:
1. Push left knob to enter the Knob Function Menu.
2. Rotate knob to highlight ALT.
3. Push knob to close menu (menu will also close automatically after 5 seconds). This
assigns ALT to knob, and ALT is shown above knob. The Altimeter area on the PFD is
also outlined to show that it is selected.
4. Rotate knob to adjust ALT bug. While ALT bug is changing, screen area is highlighted in
Cyan to draw attention to it.
5. To synchronize Altimeter to airplane's current altitude, push and hold ALT knob (on
display and control panel) until SYNC message appears above left knob on display.
Minimum Altitude Bug
To set the Minimum Altitude bug:
1.
Push left knob to enter Knob Function Menu.
2.
Rotate knob to highlight MIN.
3.
Push knob to close menu (menu will also close automatically after 5 seconds). This
assigns MIN to knob, and MIN is shown above knob. The Minimum Altimeter area on
the PFD is also outlined to show that it is selected.
4.
Rotate knob to adjust MIN bug. While MIN bug is changing, screen area is highlighted in
Cyan to draw attention to it.
HDG/TRK Bug
Heading/Track can be adjusted with the left knob on the display or the HDG/TRK knob on the
optional Knob Control Panel (see Section
). Using the knob on the control panel simplifies
the adjustment by eliminating the need to assign the function to the left knob.
To set the Heading/Track bug:
1.
Press left knob to enter Knob Function Menu.
2.
Rotate knob to highlight HDG or TRK.
3.
Push knob to close menu (menu will also close automatically after 5 seconds). This
assigns HDG or TRK to knob, and HDG or TRK is shown above knob. The Heading or
Track area on the PFD is also outlined to show that it is selected.
4.
Rotate knob to adjust HDG or TRK bug. While HDG or TRK bug is changing, screen
area is highlighted in Cyan to draw attention to it.
5.
To synchronize Heading and Track to airplane's current heading/track, push and hold
HDG/TRK knobs (on display or control panel) until SYNC message appears above left
knob on display.
