Page | 44
SkyView
HDX System
General Maintenance Manual, Revision F
6.4
SV-MAG-236 Remote Magnetometer
The SV-MAG-236 remote magnetometer (see
) is used in SkyView HDX Systems to
locate a magnetometer in
an area free of magnetic disturbances.
Although the SV-ADAHRS-200
module has an integrated magnetometer, it should be installed in an area free of magnetic
disturbances while remaining within proximity of the airplane's center of gravity. An OAT
sensor can be connected to an SV-MAG-236.
Figure 26: SV-MAG-236
6.5
OAT Sensor
An Outside Air Temperature (OAT) sensor (see
) is externally mounted where it can
accurately measure the air temperature. Only one OAT sensor is required in a SkyView HDX
System. An OAT sensor can be connected to either an SV-ADAHRS-200 module or an
SV-MAG-236 remote magnetometer.
Figure 27: SV-OAT-340