Dynisco TX180, Installation And Operation Manual

Page: 31 / 52

TX180 Temperature Transmitter 31
The 9022 code is for a 4-wire 100
⍀
DIN curve Platinum RTD with
␣
= 0.00385. This sensor will
give superior measurement results in most real-world situations where the measured temperature is
under 1,000
°
F.
The 9023 code is the 4-wire 100
⍀
SAMA Platinum Curve, known variously as the SAMA RC21-4 or
SAMA PR-279.
NOTE: The 9024 code is for Special 4 wire RTD input is reserved for a special RTD input, should
one be desired. Any special 4-wire RTD curve must be ordered from the factory.
The 9025 code corresponds to a millivolt input.
The 9026 code corresponds to an input known as the “HHTONLY”. This is reserved for a Hand-Held
set-up at the factory only.
At this point, the menus recycle to the top and begin with the first sensor input.
The 9001 code corresponds to a B type thermocouple.
The 9002 code corresponds to a C type thermocouple.
The 9003 code corresponds to an E type thermocouple.
9022
9023
9024
9025
9026
9001
9002
9003