P/N: 974153 |
Rev: 072016
|
ECO: 46503
www.dynisco.com
From lab to production,
providing a window into the process
-3-
QUICK START UTILIZING HART COMMUNICATOR
1. Follow Steps 1 through 3 from Quick Start Using Push Buttons.
2. Connect Communicator to the loop. If unsure on how to do this, refer to “Connecting the HART
Handheld Communicator” (Figure 6-1).
3. Power on HART Communicator. See HART Command tree on the following page for reference.
4. From the Main Menu:
a. Enter Tag (Quick Key 1, 3, 1)
b. Set Pressure Units (Quick Key 1, 3, 2), if required
c. Set URV (Quick Key 1, 3, 3, 2) if output turndown (rescaling), is required
d. Perform Zero Trim (Quick Key 1, 2, 5, 1, 3, 1)
5. Verify loop output is zero (4mA).
6. Remove HART Communicator from loop.