Dynex PF500-10, Service Instructions Manual

Page: 6 / 8

6
Minimum Inlet Pressure ➀
Operating Speed
Pump Models
1200 rpm 1500 rpm 1800 rpm 2400 rpm 2800 rpm 3600 rpm
psi bar psi bar psi bar psi bar psi bar psi bar
Fixed Displacement Pumps:
PF501 and PF504 0 0 0 0 0 0 0 0 0 0 5 0,4
PF507 0 0 0 0 0 0 0 0 5 0,4 10
➁
0,7
➁
PF510 0 0 0 0 0 0 0 0 10
➁
0,7
➁
15
➁
� 1,0
➁
PF1002 0 0 0 0 0 0 0 0 0 0 5 0,4
PF1003 and PF1004 0 0 0 0 0 0 0 0 5 0,4 10
➁
0,7
➁
PF1005 and PF1006 0 0 0 0 0 0
➂
➂
10
➁
0,7
➁
– –
PF1007 and PF1008 0 0 0 0 0 0
➂ ➂
10
➁
0,7
➁
– –
PF2007 0 0 0 0 0 0 3 0,2 5 0,4 �– –
PF2008 0 0 0 0 0 0 5 0,4 – – – –
PF2009 0 0 0 0 0 0 3 0,2 5 0,4 – –
PF2012 0 0 0 0 0 0 5 0,4 – – – –
PF2000 Series (Special Mounting) 0 0 0 0 0 0 5 0,4 – – – –
PF3011 0 0 0 0 0 0
➃
➃
10
➁
0,7
➁
– –
PF3015 0 0 0 0 3 0,2
➃ ➃
– – – –
PF3017 0 0 0 0 5 0,4
➃ ➃
– – – –
PF3021 0 0 0 0 3 0,2
➃ ➃
– – – –
PF3024 0 0 0 0 5 0,4
➃ ➃
– – – –
PF4011 0 0 0 0 0 0 5 0,4 – – – –
PF4016 0 0 0 0 0 0 5 0,4 – – – –
PF4018 0 0 0 0 5 0,4 10 ➁ 0,7 ➁ – – – –
PF4020 0 0 5 0,4 10 ➁ 0,7 ➁ 15 ➁ 1,0 ➁ – – – –
PF4203 and PF4205 0 0 0 0 0 0 – – – – – –
PF4208 0 0 0 0 5 0,4 – – – – – –
PF4209 and PF4210 0 0 5 0,4 10 0,7 – – – – – –
PF6023 0 0 5 0,4 10 0,7 – – – – – –
PF6033 0 0 10 0,7 15 1,0 – – – – – –
PF6046 0 0 5 0,4 10 0,7 – – – – – –
PF6054 0 0 5 0,4 5 0,4 10 0,7 – – – –
PF6070 0 0 5 0,4 10 0,7
➄ ➄
– – – –
PF6080 5 0,4 5 0,4 10 0,7
➄ ➄
– – – –
Fixed Displacement Pumps for Water-Based Fluids:
➅
All PF1300 Models 0 0 0 0 0 0 – – – – – –
PF4303 and PF4304 0 0 0 0 0 0 – – – – – –
PF4305 and PF4306 0 0 0 0 0 0 – – – – – –
PF4308 0 0 0 0 5 0,4 – – – – – –
PF4309 0 0 5 0,4 10 0,7 – – – – – –
PF4310 and PF4312 0 0 5 0,4 15 1,0 – – – – – –
Variable Delivery Pumps:
PV4018 and PV4026 0 0 5 0,4 5 0,4 10 0,7 – – – –
PV4033 0 0 5 0,4 5 0,4 – – – – – –
PV6054 0 0 5 0,4 5 0,4 10 0,7 – – – –
PV6070 0 0 5 0,4 10 0,7
➄ ➄
– – – –
PV6080 5 0,4 5 0,4 10 0,7
➄ ➄
– – – –
Pressure Compensated Pumps:
PV4000 Series 0 0 5 0,4 5 0,4 – – – – – –
PV6046 and PV6054 0 0 3 0,2 5 0,4 – – – – – –
PV6070 3 0,2 8 0,6 10 0,7 – – – – – –
PV6089 5 0,4 10 0,7 15 1,0 – – – – – –
➀
Values shown are based on fluid viscosity of 100 SUS (20 cSt) mineral oil, except pumps for water-based fluids as indicated.
➁
Inlet pressures higher than 10 psig (0,7 bar) require a high-pressure shaft seal.
➂
Minimum inlet pressure: 5 psi (0,4 bar) at 2200 rpm.
➃
Minimum inlet pressure for Model PF3011: 5 psi (0,4 bar) at 2200 rpm and 7 psi (0,5 bar) at 2500 rpm; for Models PF3015 and PF3021: 7 psi (0,5 bar) at 2200 rpm
and 10 psi (0,7 bar) at 2500 rpm maximum speed; for Models PF3017 and PF3024: 10 psi (0,7 bar) at 2200 rpm maximum speed.
➄
Minimum inlet pressure for Models PF6070 and PV6070: 10 psi (0,7 bar) at 2300 rpm maximum speed; for Model PF6080 and PV6080: 15 psi (1,0 bar) at 2200 rpm
maximum speed.
➅
Values shown are based on fluid viscosity of 33 SUS (1,9 cSt) water glycol fluid. Higher viscosity fluids may require pressurized inlet conditions then indicated. Values shown are based on fluid viscosity of 33 SUS (1,9 cSt) water glycol fluid. Higher viscosity fluids may require pressurized inlet conditions then indicated.