12
OPERATION
functions on the display (8).
FLASHING LED
If the front panel does not install in the main
unit, the LED (12) will be flashing.
REMOTE SENSOR (OPTIONAL)
Point the remote control handset to the
remote sensor
IR
(26). Press the function
keys on the handset to control the system.
ESP FUNCTION
If the unit has the electronic shockproof
function, it can be shockproof about
several tens of seconds.
RESET FUNCTION
RESET
button (27) must be activated with
either a ballpoint pen or thin metal object.
The
RESET
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET
button (27), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
y
SWITCHING TO RADIO MODE
Press
MOD
button (6) shortly to select
radio mode, the radio mode appears in
the display together with the memory
band and frequency.
y
SELECTING THE FREQUENCY BAND
At radio mode, press
BND/LOU/ENT
button (13) shortly to select the desired
band.
The reception band will change in the
following order:
→
FM1
→
FM2
→
FM3
→
AM/MW
→
LW
y
SELECTING STATION
Press
TUN/TRK
button (17) or
TUN/TRK
button (16) shortly to
activate automatic seek function. Press
for several seconds until “
MANUAL
”
appears on the display, the manual
tuning mode is selected. If both buttons
have not been pressed for several
seconds, they will return to seek tuning
mode and “
AUTO
” appears on the
display.
y
LOCAL/DISTANT
Press
LOC
button (1) to select between
local and distant stations. Local setting
for reception of strong station, and a
distant setting for reception of weaker
stations. This function is effect during
AUTO SEEK operation.
y
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press
AS/PS
button (18) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 6 strongest
stations are stored into the
corresponding preset number button.
- Program scanning
Press
AS/PS
button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level
of stop level, the radio is holding at
that preset number for several
seconds with release mute, then
searches again.
y
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
2ND beeps come out), current station is
stored into the number button.
y
MONO/STEREO
Press
MON
button (2) to select mono or
