11
OPERATION
SWITCHING ON/OFF THE UNIT (FOR
LCD VERSION ONLY)
Switch on the unit by pressing any button
(except
button (7) and
button (4)).
When system is on, press
PWR
button (9)
to turn off the unit.
SWITCHING ON/OFF THE UNIT AND
ILLUMINATING (FOR VFD VERSION
ONLY)
Switch on the unit by pressing any button
(except
button (7) and
button (4)).
When system is on, press
PWR/DIM
button
(9) shortly to control the brightness of VFD.
Press it for several seconds to turn off the
unit.
FACEPLATE RELEASE
Press
button (7) to detach the
removable faceplate.
SOUND ADJUSTMENT
Press
PUSH
SEL
button (10) to select the
desired adjustment mode. The adjustment
mode will change in the following order:
By rotating the knob (10) clockwise or
counter-clockwise, it is possible to adjust the
desired sound quality.
Press and hold the
SEL
button (10) for
several seconds to enter into the selection
for the situation of beep sound, then rotate
the knob (10) clockwise or
counter-clockwise to select as follows:
BEEP 2ND BEEP ALL BEEP OFF
- BEEP 2ND mode:
The beep is only generated when all
allowed double function button is
pressed long (several seconds).
e.g.
When preset button is pressed.
When
BND/LOU/ENT
button (13) is
pressed.
When
AS/PS
button (18) is pressed.
- BEEP
ALL
mode:
The beep is generated when every
button is pressed.
- BEEP OFF mode:
The beep is disabled.
LOUDNESS
Press
BND/LOU/ENT
button (13) for
several seconds to reinforce the bass
output. Press it for several seconds again
to release this function.
SET THE CLOCK
Press the
DSP
button (15), the clock is
shown on the display. Then hold down the
button until the clock flashes. Then press
the
TUN/TRK
button (17) to change
hours or
TUN/TRK
button (16) to
change minutes.
MUTE
Press
MUT
button (3) to mute down the
sound instantly. If any button is pressed in
the mute state, the mute state is released.
EQUALIZATION
Press and hold
EQ/REC
button (11) for
several seconds to turn on equalization
function and to select desired audio mode.
There are five kinds of mode as below:
(FOR LCD VERSION ONLY)
→
FLAT
→
CLASSICS
→
POP M
→
ROCK M
→
DSP OFF
(FOR VFD VERSION ONLY)
→
FLAT
→
CLASSICS
→
POP M
→
JAZZ
→
DSP OFF
SUBWOOFER (OPTIONAL)
Press
MOD
button (6) for several
seconds to toggle sub-woofer output.
Press it for several seconds again to
release this mode.
LIQUID CRYSTAL DISPLAY (FOR LCD
VERSION ONLY)
VACUUM FLUORESCENT DISPLAY
(FOR VFD VERSION ONLY)
Exhibit current frequency and activated
