Dynex DX-WGUSB, User Manual

Page: 2 / 20

2 Contents
Dynex DX-WGUSB Wireless
LAN USB Adapter
Contents
Introduction ..................................................................................... 2
Installing the software and hardware .............................................. 2
Configuring the wireless network .................................................... 4
Troubleshooting ............................................................................... 6
FCC ................................................................................................... 7
Legal notices .................................................................................... 7
Français ....................................................... 8
Español ...................................................... 14
Introduction
Thank you for purchasing a Dynex Wireless LAN 802.11g USB adapter.
This package contains:
• A Wireless LAN 802.11g USB adapter
• A printed user guide
• A CD containing the wireless network adapter utility and drivers
and this user guide
If anything is missing, contact Dynex at (800) 305-2204.
Installing the software and
hardware
Use the following procedures to set up your wireless network.
To install wireless networking on a Windows XP computer:
Caution: Do not connect the USB adapter until instructed to do so.
1 Install the access point. For more information, see the access point
documentation.
2 Turn on your computer.
3 Insert the included CD in the optical drive.
4 If the installation program does not start automatically, use
Windows Explorer or My Computer to browse the CD and locate
the file named
setup.exe , then double-click setup.exe to start
installing the software.
5 Follow the on-screen instructions to install the software.
6 Connect the USB adapter to a USB connector on your computer.
The
Found New Hardware Wizard opens.
7 Click Install the software automatically (Recommended) ,
then click Next .
8 If a warning box opens, click Continue Anyway . Your computer
copies files to your hard drive.
9 Click Finish .
To install wireless networking on a Windows 98, Windows 2000, or
Windows ME computer:
Caution: Do not connect the USB adapter until instructed to do so.
1 Install the access point. For more information, see the access point
documentation.
2 Turn on your computer.
3 Insert the included CD in the optical drive.
4 If the installation program does not start automatically, use
Windows Explorer to browse the CD and locate the file named
setup.exe , then double-click setup.exe to start installing the
software.
5 Follow the on-screen instructions to install the software.
6 Connect the USB adapter to a USB connector on your computer.
The
Found New Hardware Wizard opens.
7 Right-click on the My Computer desktop icon, click Properties ,
then click Hardware Device Manager . Make sure that the USB
adapter is listed as one of the devices in your computer.
DX-WGUSB.fm Page 2 Monday, August 21, 2006 3:20 PM