Installation instructions
5
DX-TVM113
STEP 2 -
Option 1: Installing on a wood stud* wall
Note
: Any drywall covering the wall must not exceed 5/8" (16 mm).
1
Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.
2
Align the wall plate template (
R
) at the height you determined in the previous step, make sure that it is level,
then tape it into place. Use a pencil to mark the lag bolt hole locations (4) on the stud centers. Remove the
wall plate template.
3
Drill pilot holes to a depth of 2.5 in. (63.5 mm) using a 7/32 in. (5.5 mm) diameter drill bit.
4
Align the wall plate (
A
) with the pilot holes, insert the lag bolts (
P
) through the lag bolt washers (
O
), then
through the holes in the wall plate. Tighten the lag bolts only until they are firm against the wall plate.
CAUTION:
• Avoid potential injuries or property damage!
• DO NOT over-tighten the lag bolts (
P
).
You’ll need
R
16-24 in.
2.5 in.
(63.5 mm)
* Minimum wood stud size: common 2 x 4 in. (51 x 102 mm)
nominal 11/2 x 31/2 in. (38 x 89 mm).
* Minimum horizontal spacing between fasteners cannot be
less than 16” (406 mm).
DX-TVM113
Wall Plate Template • Gabarit • Plantilla
Note
: For wood frame installations, use a stud finder to locate wood
studs first.
Remarque
: Pour une construction à ossature de bois, localiser
d'abord les montants en bois, à l'aide d'un détecteur de montants.
Nota
: para la instalación en construcciones de armazón de madera,
primero debe localizar las vigas de madera con un localizador de vigas.
http://san.us/286
Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.
<FR>
Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.
<SP>
Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.
Tools Needed
Outils nécessaires
Herramientas requeridas
Top
Haut
Parte superior
Top
Haut
Parte superior
V1 13-0140
Edge-to edge
stud finder
P
(4)
Pencil
Drill
7/32" wood
drill bit
1/2" socket wrench
Level
Wall plate (
A
)
O
(4)
Wall plate template (
R
)
Tape
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 5 Friday, June 7, 2013 7:38 AM
