Mini Audio Shelf System w/Bluetooth
15
Programming and timing CD playback
Programming CD playback
1
Press
(stop) while playing a CD, then press
PROGRAM
. The display
shows “PR 0100.”
2
Using the number buttons, enter the number of the song you want to
play first. For example, to select song 4 as the first song played in the
program, enter “0” then “4” for track 4.
After each song is entered, your mini audio shelf system is automatically
set up for you to enter the next song. Continue programming until you
have entered all the songs you want to play.
3
When you finish programming, press
PLAY/ENTER
to confirm. Your mini
audio shelf system plays the songs in the programmed order.
4
To cancel the program, press
(stop) twice.
Setting the playback from a specific time point
•
Press
TIME
once. The display screen shows “D_ _ _ _.” Enter the digits to
set the desired listening time from the beginning of the disc. For
example, if you want to start playback from time 35:05 (within the total
disc time), press
TIME
once, then enter digits
3, 5, 0, 5
on the “D_ _ _ _”
interface. The CD starts playing from 35:05.
•
If you want to listen to the current track from a specific time point, press
TIME
twice, the display screen shows “T_ _ _ _.” Enter the digits to set
the desired listening time of this track. For example, if you want to start
playback from time 03:05 (within the total current track time), press
TIME
twice, then enter digits
0, 3, 0, 5
on the “T_ _ _ _” interface, the CD
starts playing the content at 03:05.
Note
You must enter two digits for the song numbers.
Note
Program CD playback is available only for standard music CDs,
not MP3 CDs.
Notes
• While playing music from a USB device, you can only set
the playback time of the current track.
• While playing music from an MP3 CD, you can only set
the playback time of the current track.
DX-SH115_15-0776_MAN_V3_ENG.fm Page 15 Wednesday, September 23, 2015 8:53 AM
