12
DX-SH115
Volume control and mute
•
After you select the sound source you want, turn the
VOLUME
knob
to
set the volume to a comfortable level.
•
Press
(mute) to mute the sound. Press
(mute) again, or
VOL+
or
VOL–
to turn the sound back on.
Adjusting the tone
•
In any mode, press
TONE
on the remote control to select Bass or Treble.
While
BASS
or
TREBLE
is on the display, press
Vol +/Vol-
to adjust the
level.
Selecting the sound equalization
•
Press
EQ
to select the sound equalization you want. Choose one of the
following preset options:
JAZZ, ROCK, CLASSIC, POP, LIVE
,
DANCE
, or
OFF
(no equalization).
Using Radio mode
Tuning to a station
1
Press
SOURCE
repeatedly to select
FM
(Tuner)
mode or press
FM
on the
remote control. “
TUNER
” appears on the display.
2
Adjust the volume to a comfortable level.
3
Press
MO/ST
to switch between Mono and Stereo Tuner mode.
4
Tuning to a station:
•
Press the number buttons on the remote control to select a specific
frequency. For example, to listen to 99.7 MHz, press 9, 9, and 7 to go
to that frequency.
•
Briefly press
TUNE +
or
TUNE –
on the remote control to tune the
radio up or down one frequency step (0.2 MHz). A three second press
and release tunes automatically to the next strong station.
•
When a strong FM signal is received, “
” appears on the display if the
Tuner mode is set to Stereo.
•
Briefly press
or
PRESET –
to tune to the next or previous
preset station. Up to 30 stations can be preset.
5
Scanning for stations:
•
To automatically scan for stations, press
SEARCH
on the remote
control. The searched stations are automatically saved as presets.
•
To tune to the next highest or lowest radio station with a strong
signal, press and hold
TUNE+
or
TUNE-
for three seconds.
Note
When the searched stations are saved as presets, your existing
presets will be lost.
DX-SH115_15-0776_MAN_V3_ENG.fm Page 12 Wednesday, September 23, 2015 8:53 AM
