Dynex DX-24LD230A12, User Manual

Page: 27 / 48

Adjusting the sound
23
DX-24LD230A12
Adjusting the sound
Selecting the sound mode or audio
language
To select an audio language in digital TV mode:
• Press SAP repeatedly to select an audio language (if
available).
To select the sound mode in analog TV mode:
• Press SAP repeatedly to cycle through the audio
sound mode. The options available depend on your
TV provider. You can select:
• Mono —Select this option if there is noise or
static from a weak broadcast signal.
• Stereo —Select this option for programs
broadcast in stereo sound.
• SAP —Select this option to enable audio in an
alternative language.
Adjusting the sound settings
To adjust the sound settings:
1
Press MENU . The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Audio . The Audio menu
opens. Press or ENTER / to access the menu.
3
Press or to highlight an option, then press or
to adjust the setting. You can select:
•
Mode —Selects the EQ sound mode. You can
select Standard , Theater , Music , News , or
Custom .
• Treble —Adjusts the high sounds.
• Bass —Adjusts the low sounds.
• Balance —Adjusts the balance between the left
and right audio channels.
• Auto Volume —Adjusts the volume to keep the
volume level consistent when switching
channels or when switching from a TV show to a
commercial. You can select
On or Off .
• Advanced Audio —Opens the Advanced Audio
sub-menu.
You can select:
• Digital Audio/SPDIF —Selects the preferred
audio format for digital audio signals. Options
include
PCM and RAW .
• Audio Language —Selects the default
language track when watching digital TV
programs. Options include
English , Français
(French), and Español (Spanish).
• MTS/SAP —Selects the default language
stream when watching analog or digital TV
channels. See "Selecting the sound mode or
audio language" on page 23.
• Speakers —Selects the TV audio output
source. If an external audio amplifier is
connected to your TV/DVD combo, select
External to output the TV sound from the
amplifier.
• Reset Audio Settings — Resets all audio settings
to factory defaults.
4
Press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV/DVD combo and
listen to the program audio only.
To play TV audio only:
1
Press MENU . The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Channel . The Channel
menu opens. Press or ENTER / to access the
menu.
Note
You can also press AUDIO to select the audio mode.
MTS Audio: Stereo
DX-24LD230A12.book Page 23 Friday, April 8, 2011 2:05 PM