10
Making connections
DX-24LD230A12
Using composite video cable (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an A/V cable (not provided) to the
VIDEO
IN
/
VIDEO 1
, and
L
,
R
jacks on the back of your
TV/DVD combo and to the composite video and
audio out jacks on the cable or satellite box.
4
Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5
Go through the setup wizard described on page 16.
6
To watch TV, press
INPUT
to open the
INPUT SOURCE
list, then press
INPUT
repeatedly, or press
or
to
select
A/V
, then press
ENTER
/
.
Using coaxial cable (good)
To connect a cable or satellite box using coaxial cable:
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN
jack on the back of your TV/DVD
combo and to the coaxial out jack on the cable or
satellite box.
4
Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5
Go through the setup wizard described on page 16.
P
B
P
R
Back of TV/DVD combo
Cable or satellite box
A/
V c
able
Cables are often
color-coded to match
color-coded jacks.
Notes
•
Use a coaxial cable to eliminate interference and
noise from radio waves.
•
Do not bundle the coaxial cable with the power
cord or other cables.
P
B
P
R
Cable or satellite box
Back of TV/DVD combo
Co
ax
ia
l c
ab
le
DX-24LD230A12.book Page 10 Friday, April 8, 2011 2:05 PM
