16
Turning on your TV/DVD combo for the first time
DX-19LD150A11
Turning on your TV/DVD combo
for the first time
The first time you turn on your TV/DVD combo, the
Setup
Wizard
opens. The
Setup Wizard
guides you through
setting up basic settings including the menu language,
date and time, picture mode, and TV signal source.
To set up your TV/DVD combo:
1
Make sure that you have:
• Installed the remote control batteries. (See
page 15 for details).
• Connected an antenna, cable TV, or satellite TV.
(See page 8 to page 10 for details.)
• Connected the power cord. (See page 8 for
details.)
2
Press (Power), then wait several seconds. The
power LED on the front of your TV/DVD combo turns
on and the
Choose your menu language
screen
opens.
3
Press
or
to highlight a language, then press
ENTER
/
. The
Time
screen opens with
Mode
highlighted.
4
Press
or
to highlight an option, then press
or
to adjust the setting. You can adjust:
•
Mode
—You can select
Auto
or
Custom
. If you
select
Auto
, you can select
Time Zone
and
Daylight Savings
settings, but the date and
time are set automatically from a digital TV
signal. If you select
Custom
, you can manually
set the date and time.
•
Time Zone
—You can select
Eastern
,
Central
,
Mountain
,
Pacific
,
Alaska
,
Hawaii
,
Atlantic
, or
Newfoundland
.
•
Daylight Savings
—You can select
On
(if your
viewing area observes Daylight Savings Time) or
Off
(if your viewing area does not observe
Daylight Savings Time).
•
Year
—Press
or
to select the current year.
•
Month
—Press
or
to select the current
month.
•
Day
—Press
or
to select the current day.
•
Time
—Press
or
to highlight the hour,
minute, or AM/PM, then press
or
to adjust
each item.
5
Press
ENTER
/
. The
Choose Your Picture Mode
screen opens.
6
Press
or
to highlight
Home Mode
or
Retail
Mode
, then press
ENTER
/
.
If you selected
Retail Mode
, a message appears
“If you select Retail Mode, then Energy saving is
not realized.” Select
Yes
to continue, or select
No
to change your selection.
The
Choose your TV source
screen opens.
7
Press
or
to highlight
Antenna
,
Cable
, or
Cable/
Satellite Box
(if your cable TV uses a box, select
Cable/Satellite Box
), then press
ENTER
/
. If you
chose
Antenna
or
Cable
, your TV/DVD combo
automatically starts scanning for channels available
in your viewing area. If you chose
Cable/Satellite
box
, your TV/DVD combo does not need to scan for
channels.
If you select
Antenna
, your TV/DVD combo
searches for digital channels first. When the
digital channel search is complete, a message
appears asking if you want to search for analog
channels. Select
Yes
to continue searching for
analog channels, or select
No
to stop searching
for channels.
8
To watch TV, press
INPUT
and select the
corresponding video input source from the
INPUT
SOURCE
list.
Note
You can press
EXIT
at any time to stop the auto scan,
but you must run the auto scan again to create a
channel list.
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 16 Monday, August 29, 2011 8:29 AM
