6
Large Extended Tilt Mount
www.dynexproducts.com
STEP 2 - Select screws, washers, and spacers
1
Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware
included. (If there are screws that came with your TV, they are almost always in the holes on the back of your TV.) If you
don't know the correct length of the mounting screws your TV requires, test various sizes by hand-threading the
screws.
Select one of the following types of screws:
For a TV with a flat back:
• M4 X 12 mm screws
• M6 X 12 mm screws
• M8 X 16 mm screws
For a TV with an irregular/obstructed back:
• M4 X 35 mm screws
• M6 X 20 mm screws
• M6 X 35 mm screws
• M8 X 25 mm screws
• M8 X 35 mm screws
• M8 X 50 mm screws
If you use M4 screws, select the M4 washers or if you use M6 or M8 screws, select the M6/M8 washers. For an irregular or
obstructed TV back, also use the spacers.
2
Remove the screws from the holes in the back of your TV.
CAUTION:
To avoid potential personal injuries and property damage, make sure
that there are adequate threads to secure the brackets to your TV. If you encounter
resistance, stop immediately and contact customer service. Use the shortest screw
and spacer combination to accommodate your TV. Using hardware that is too long
may damage your TV. However, using a screw that is too short may cause your TV to
fall from the mount.
Screw is
too long
Screw fits
correctly
Screw is
too short
